Stop Living With An Ugly Home!

Looks Like Luxury. Priced Like A Steal.

Does Your House Need A Makeover?

If any of these sound familiar, you're not alone — and your floor is trying to tell you something:

Ugly cracks that keep getting worse

Bare concrete that makes the whole house look cheap

Oil stains that you can't scrub out

Peeling or flaking from a failed DIY kit

Bubbling or lifting from moisture underneath

The good news? Every single one of these is fixable — in a single day.

We Upgraded to a Premium System

Traditional Epoxy (The Old Way)

⚠️ Rigid & Brittle

Epoxy dries hard like glass. When your concrete shifts with the summer heat and winter cold, the epoxy cracks, chips, and peels.

⚠️ Not UV-Stable

Standard epoxy turns yellow or amber within 12 to 18 months of sun exposure. Your garage door opens 1,500 times a year — that's a lot of UV.

⚠️ Hot Tire Pickup

Hot tires soften epoxy, causing it to peel off the slab and stick to your tires. It's the most common way epoxy fails.

⚠️ Days to Cure

You're locked out of your garage for 3 to 5 days waiting for it to dry.

⚠️ Acid-Washed Prep

Budget contractors use acid washing that barely profiles the concrete. The coating sits on top — it doesn't bond into it.

🟢 Our New Polyurea & Polyaspartic System

✅ Flexible & Impact Resistant

Our Polyurea base coat is highly flexible. It moves with your concrete, absorbing impacts from dropped tools without cracking.

✅ 100% UV-Stable

Our Polyaspartic top coat is aliphatic — meaning it will never yellow, chalk, or fade, even in direct sunlight.

✅ Chemical & Heat Proof

Impervious to oil, gas, salt, and hot tires. It won't peel. Period. That's why we back it with a warranty.

Done in One Day

Your garage back fast. Walk on it that evening, drive on it in 24 hours.

✅ Diamond-Ground Prep

We physically open the pores of your concrete slab so the Polyurea base coat penetrates deep and bonds like roots — not tape.

The Home Pros Promise: Bulletproof. Permanent. Done in a Day.

It starts before the first coat ever touches your floor. We diamond-grind the concrete to physically open its pores, so every layer that follows bonds deep into the slab — not just on top of it.

Here's exactly what goes down, and why it holds up where other coatings don't.

LAYER 1 - FOUNDATION

Polyurea Base Coat

Once the primer is set, we apply a resin that soaks into the concrete itself — not just the surface. It moves with the slab, absorbs the hits, and eliminates the reason floors peel in the first place.

Adhesion + Flexibility

LAYER 2 - CHARACTER

Full-Broadcast Flakes

While the base coat is still wet, we spread color flakes into the entire surface. It adds grip underfoot and gives the floor that clean, finished look. Pick the color blend that fits your space.

Texture + Aesthetics

LAYER 3 - ARMOR

Polyaspartic Top Coat

The final coat goes over everything and locks it all in. It won't yellow in the sun, scratch from daily use, or stain from oil, gas, or hot tires. This is the layer that makes the warranty mean something.

UV Protection + Durability

Our Garage Floors Are Built To Last A Lifetime

Diamond-Ground Prep: We open the pores of your concrete so the base coat penetrates deep, bonding for life.

No Bubbling or Peeling: Our mitigation primer seals out moisture before it ever lifts your garage floor.

Flexible & Impact Resistant: Our Polyurea coating moves with your concrete & absorbs impacts from dropped objects.

Full-Broadcast Flakes: Wall-to-wall decorative flakes in a wide range of colors, sealed in for a high-end finish with grip.

100% UV-Stable: Our Polyaspartic top coat will never yellow, chalk, or fade in direct sunlight.

Chemical & Heat Resistant: Stands up to oil, gas, salt, and hot tires. It won't peel. Period. Backed by our lifetime warranty.

Walk On It In Hours, Drive In 24 Hours: Cures in hours, not days. Install today — drive on it tomorrow.

Home Pros LLC

85 Bluestone Drive, Nashua NH 03060

Phone: (603) 566-7137

Serving Hillsborough County

Terms & Conditions | Privacy Policy

© Copyright 2026